Saturday, 6 May 2017

Kali Net Hunter Rom For Android

Hiii
    friends !
        
        Today I am going to tell you how to install Linux kali nethunter any rooted device.
        (In my case I install on MI PAD but hope working on all devices but not less than 3GB internal storage for full install)
        
        Note: - This is Linux partisan testing os only for hackers or programmers.
        
        Requirements...
        1-NetHunter.zip
        2-castom recovery (CWM OR TWRP)
        3- Z archiver free on Google play.
        
Ok let’s start....
    
        1- Open nethunter.zip with z archiver.
        2- Copy kali-full.tar.xz file from /data/local/    
(put file copy on safe place always maybe needed more then one time so be careful)
        3- After copy delete file from nethunter.
        4-you can remove kali boot animation by deleting file bootanimetion.zip from /system/media/
        Because it’s become boring after few days...
        5-full backup of your system. I am not responsible for any data loss…
        
Put nethunter.zip to your sdcard and flash with recovery in current rom.
When completed reboot system.
You see nethunter application install on your system, just uninstall it.
Install nethunter.apk attached on end of post.
Open nethunter application give SU permission.
Then copy kali-full.tar.xz on internal storage.
Open nethunter on left top corner you see 3 lines click on it.
You see kali chroot manager click on it. Click install chroot.
Select SD card -> select full chroot.
It install aproxmetly in 10 to 15 minute. When completed metapakages option open.
Click install and update. Terminal app open give su permission wait terminal to finish.
Now its ok…
You have nethunter. 
Now you can chose kali all metepakge to get every tool available on kali..

 Nethunter.zip 》Download







Posted by at No comments:

Tuesday, 20 September 2016

CM 14 Nougat 7.0 ROM For Moto E

Status of Moto E CM14 (condor) CyanogenMod 14 Nougat ROM build:

WHAT’S WORKING:
– Boots
– Single SIM
Camera (photos only)
– Wifi
– Bluetooth
– Video Playback
– Audio ( Record and Playback )
– Sensors
– GPS
KNOWN ISSUES:
– Video Recording
– Dual SIM

REQUIRED DOWNLOADS AND LINKS FOR MOTO E CM14 (CYANOGENMOD 14) NOUGAT ROM UPDATE GUIDE:

         Points to NOTE on BACKUP:
      1. – Try to avoid restoring apps backup using Titanium Backup. It may break things up.
        – Don’t restore system data using Titanium Backup! It will definitely break the current installation.
        – It is also discouraged to Restoring Apps + Data using Titanium Backup.

      2. Upgrading from earlier version of Moto E CM14 Nougat ROM:

      Complete the initial setup and enjoy Android Nougat 7.0.0_r1 with CyanogenMod 14 On Moto E (codename: condor). After this CM14 installation you may want to enable ROOT access on your phone and here is how you can do that:
      How to Enable ROOT on CM14/CyanogenMod 14.
    • ENJOY it....
    Posted by at No comments:

    Root Android Device Using Kingo Root (Easy Steps)


    1. Step 1: Free download KingoRoot.apk. ...
    2. Step 2: Install KingoRoot.apk on your device. ...
    3. Step 3: Launch "Kingo ROOT" app and start rooting. ...
    4. Step 4: Waiting for a few seconds till the result screen appear.
    5. Step 5: Succeeded or Failed.
    Posted by at No comments:

    Increase Android RAM Using an App

    Download ROEHSOFT RAM EXPANDER (SWAP) (PREMIUM)*
    Steps to download ROEHSOFT RAM EXPANDER (SWAP)
    Step 1: Open Google Play Store in your android device.
    Step 2: Browse for ROEHSOFT RAM EXPANDER (SWAP) in App store.
    Step 3: Tap on to install option and install App in your Android device.
    Step 4: Open the ROEHSOFT RAM EXPANDER (SWAP) app and increase the app.
    TAP here to Download the ROEHSOFT RAM EXPANDER (SWAP) app.
    We commend every user to check if your device is compatible to ROEHSOFT RAM EXPANDER (SWAP) app.
    Features of ROEHSOFT RAM EXPANDER (SWAP) app are as follow
    – Free SD card memory as a RAM use (SWAP RAM / SWAP MEMORY)
    – Swapfile RAM expansion up to 4.0 GB (file system limit)
    – No limit on SWAP partition!
    – The usual performance degradation when paged not occur with sd card from class-8
    – Widget for PNP swap (swap on / off swap)
    – Detailed Memory Information & Analysis
    – Autorun
    – Swappiness kernel parameter set
    – Easy foolproof use
    (1 click optimization and automatic calculation)
    – Supporting Tung all Android devices (root access and Kernelswap support)
    Posted by at 2 comments:

    Sunday, 18 September 2016

    Xiaomi MIUI8 5.1.1 ROM for LENOVO A6000 & A6000+

    Highlight :
    •Fixed notification shade issues in Second space
    •Status bar wasn’t working properly problem solved
    •New feature to slide down to exit full screen preview
    •Turn off screenshot sound in screenshot settings
    •Weather icon problem solved
    ••IT IS RECOMMENDED TO MAKE A BACKUP OF CURRENT ROM••
    • Latest Android Security Patch - 1 Aug 2016

    • New TWRP V3.0.0.0 included .

    • SuperSu Preinstalled. 

    • Gapps Included 

    How To Install :
    1. Download The ROM

    2.Reboot To Recovery (Recommended TWRP by Jav, you can try with other)

    3.Wipe dalvik,cache,data,system.

    4. Now locate the ROM zip file and slide bottom bar to flash. 

    5. Reboot . Done .Enjoy 

    After rebooting Next time when you will reboot into Recovery you will see a new Version of TWRP recovery i.e TWRP 3.0.0.0

     Download Rom From Here :

     V 6.9.1 (Latest) • Download Latest Version From Here 
    V 6.7.21• Download 
    V 6.6.23 • Download 
    V 6.6.17• Download 
    V 6.5.19 • From Here 
    V 6.5.12 • From Here 
    V 6.4.28 • From Here 
    V 6.4.21 • From Here 
    V 6.4.15 • From Here 
    V 6.4.14• Dead Link
    V 6.4.7• From Here 
    V 6.3.31 • From Here 

     • ProblemWhatsApp , Facebook and other apps notifications are not showing .
    Solution • Launch the Security App from Home screen > Permissions > AutoStart > Toggle the switch given in side of apps name . 
    Now you won't miss any notification.

     Screenshots :






    ENJOY it.....
    Posted by at 1 comment:

    How to Root Lenovo A6000

    Root Lenovo A6000

    This method is tested and working on lenovo a6000 LOLLIPOP FIRMWARE

    BIG CREDIT FOR SEVENMAXS for his TWRP image!

    So let's get started:
    1. Download the kingroot app from play store and run it.make sure to have a stable WiFi/data connection because it is needed for kingroot to root our devices properly.
    2. Download the twrp HERE I used the 3.0.0.1 ver. And extract the file "recovery.img" inside the zip.
    3. Download flashify app from playstore open it and flash the recovery.img!
    4. After successful flashing reboot to recovery then BOOM! You have TWRP!
    5. CONGRATULATIONS AND ENJOY!
    Posted by at No comments:

    Sailfish OS 2.0.1.11 Port For REDMI 2




    The Alpha release was experimental and was not meant for the general public, but still recieved an overwhelming response. This new Beta version is free of most bugs encountered earlier and is suitable for everyone to get a taste of SailfishOS on their phone.
    Read the installation instructions carefully.

    Changelog from Alpha -->
    * Bluetooth fixed.
    * Audio now works out of the box.
    * Camera Resolutions updated.
    * Flash now works in Camera.
    * Settings app now shows settings for cellular networks.
    * FM-Radio now supported. ( Highly Experimental. Read the FM-Radio section below )
    * Stand-by time vastly improved.
    * Basic Jolla apps are now pre-installed. ( Before anyone talks about bloatware, you got the option to uninstall them)
    * Warehouse, the community appstore is now pre installed.


    Sailfish OS’s heritage lies in Nokia times, especially in the MeeGo operating system. Prior to 2011 Nokia and Intel had a vision of an open mobile operating system. Together they invested around 1 billion USD to the project and created an open source based operating system called MeeGo, which was used as a basis for several devices, such as the iconic Nokia N9. Although the Nokia N9 became the beacon of open source operating systems, Nokia decided to end the project and chose instead to continue with Microsoft’s Windows Phone OS. The rest of that is another story.

    SailfishOS has now been successfully ported to Redmi 2 and here I am sharing the steps to install it on your phone.
    1. Disclaimer: Your warranty is now void. You will lose all your data on your phone and may render it unusable. This software is provided as is without any warranty of any kind whatsoever. The user shall solely be reponsible for any consequence arising out of following this guide. I, or anyone else shall not be held responsible for bricked devices, dead sd-cards, thermonuclear war, you getting fired because the alarm app failed or any other consequence of following this guide. The linked zip contains some proprietary files.
    Copy the Code


    Prerequisites -->
    1) Latest TWRP recovery installed (Others may work too but I haven't tested). You can get it here-->http://forum.xda-developers.com/redmi-2/development/recovery-recovery-built-source-inside-t3277621

    2) cm-12.1-UNOFFICIAL-wt88047 zip by kumajaya. You can get it from his google drive link here--> Download

    3) SailfishOS zip file.

    This is not an Android ROM and thus the instructions to install are quiet different. Follow them carefully.

    1) Boot to recovery. Wipe cache, dalvik-cache, system and data.

    2) Copy the Downloaded files to the sdcard via USB.

    3) Install cm-12.1-20160318-UNOFFICIAL-wt88047. Do NOT reboot after installing.

    4) Install SailfishOS zip file. The installation will take around 10 minutes so don't think that its stuck. Ignore any errors about being unable to mount data partition.

    5) Reboot System when installation succeeds.
    Screenshots :




    This post was edited by adeen-s at 17:22, Jun-30-2016

    The Alpha release was experimental and was not meant for the general public, but still recieved an overwhelming response. This new Beta version is free of most bugs encountered earlier and is suitable for everyone to get a taste of SailfishOS on their phone.
    Read the installation instructions carefully.

    Changelog from Alpha -->
    * Bluetooth fixed.
    * Audio now works out of the box.
    * Camera Resolutions updated.
    * Flash now works in Camera.
    * Settings app now shows settings for cellular networks.
    * FM-Radio now supported. ( Highly Experimental. Read the FM-Radio section below )
    * Stand-by time vastly improved.
    * Basic Jolla apps are now pre-installed. ( Before anyone talks about bloatware, you got the option to uninstall them)
    * Warehouse, the community appstore is now pre installed.


    Sailfish OS’s heritage lies in Nokia times, especially in the MeeGo operating system. Prior to 2011 Nokia and Intel had a vision of an open mobile operating system. Together they invested around 1 billion USD to the project and created an open source based operating system called MeeGo, which was used as a basis for several devices, such as the iconic Nokia N9. Although the Nokia N9 became the beacon of open source operating systems, Nokia decided to end the project and chose instead to continue with Microsoft’s Windows Phone OS. The rest of that is another story.

    SailfishOS has now been successfully ported to Redmi 2 and here I am sharing the steps to install it on your phone.
    1. Disclaimer: Your warranty is now void. You will lose all your data on your phone and may render it unusable. This software is provided as is without any warranty of any kind whatsoever. The user shall solely be reponsible for any consequence arising out of following this guide. I, or anyone else shall not be held responsible for bricked devices, dead sd-cards, thermonuclear war, you getting fired because the alarm app failed or any other consequence of following this guide. The linked zip contains some proprietary files.
    Copy the Code


    I'd like to thank the following for their support and sources. (In no particular order) -->

    @mal-, @kimmoli, @Stskeeps, @Litew, @jusa_, @Nokius, @sledges, @spiiroin @ketut.kumajaya, The other SailfishOS porters and The Cyanogenmod Team.


    Prerequisites -->

    1) Latest TWRP recovery installed (Others may work too but I haven't tested). You can get it here-->http://forum.xda-developers.com/redmi-2/development/recovery-recovery-built-source-inside-t3277621

    *Note that the Cyanogenmod version is now changed.
    2) cm-12.1-20160318-UNOFFICIAL-wt88047 zip by kumajaya. You can get it from his google drive link here--> http://forum.xda-developers.com/redmi-2/development/rom-cyanogenmod-unofficial-builds-t3200883

    3) SailfishOS zip file. Download link given below.


    This is not an Android ROM and thus the instructions to install are quiet different. Follow them carefully.

    1) Boot to recovery. Wipe cache, dalvik-cache, system and data.

    2) Copy the Downloaded files to the sdcard via USB.

    3) Install cm-12.1-20160318-UNOFFICIAL-wt88047. Do NOT reboot after installing.

    4) Install SailfishOS zip file. The installation will take around 10 minutes so don't think that its stuck. Ignore any errors about being unable to mount data partition.

    5) Reboot System when installation succeeds.



    Screenshots-->













    Notes-->

    1) This is not an Android ROM. Android apps will not work right now. But a way for Android apps to work is available but will take quiet some time before it gets on our device.

    2) Root access (using devel-su in terminal) requires a password which can be set in Settings>Developer Options.

    3) For advanced users, you can ssh into the device after setting a password in Developer options using ssh nemo@192.168.2.15 over USB.

    4) Do not register for a Jolla account. You will get an error about failed IMEI registration. This will be fixed as soon as Jolla allows ported devices to be registered.

    5) The Store will not work. It needs a Jolla account. You can however use the openrepos warehouse for installing apps.

    6) MTP over USB does not work.

    7) Battery drains faster if screen is ON. Better than alpha but still needs improvement.

    FM-Radio -->
    You can play FM-Radio now but it is experimental.
    Plug in your headphones and launch the PirateFM app for radio.
    if it won't start, open terminal and use "harbour-piratefm" to start it.
    Once the app starts, it should show a frequency. If its stuck at 0.0 MHz, then close the app(close, not minimise) and restart it again.It should show a frequency now. If you have echoing audio in the headphones, i.e. you hear your own voice in the headphones, then open terminal and " systemctl restart --user pulseaudio" and then try running the app again.
    FM will not work through the speakers, and it also cannot be muted.

    ENJOY it......



    Posted by at No comments:
    Subscribe to: Posts (Atom)